Maintain Your Fish Tank Aquarium Water Chemistry

The qualityy of the water in your aquarium is vital to the health of your fish in the well-being of your fish tank and one way to make sure that this water is in tip top shape is to test it often. You need to be sure that the water is the right temperature, not too acidic or two alkaline and has the right amounts of ammonia, nitrite and nitrate.

To maintain your fish tank aquarium and enjoy your fish keeping and ensure that your fish and plants thrive it's a good idea to know something about water chemistry and how it applies to your hobby. You should have a good water test kit to help in keeping the tank in equilibrium which should include the following tests.

"SeaClear Bowfront Aquarium Combo Color : Black"

pH
Chlorine and chloramine
Hardness
Ammonia
Nitrite
Nitrate

Definitions

Ammonia - fish produce ammonia as a exhausted product. It is poisonous and a build up will injury the fish. During the cycling of a new fish tank bacteria are encouraged to grow that proselyte the ammonia, first to nitrites and then to much fewer hurtful nitrates. Ideally ammonia level should always be zero.

Chlorine and chloramine - Chlorine is used as a tap water disinfectant and needs to be extracted before adding tap water to the fish tank. Leaving a pail of water for 2 days will allot chlorine to evaporate. Chloramine is used in some areas as a water disinfectant and cannot be removed this way. You will need to buy a water treatment chemical specially made for fish tanks to remove chloramine.

Copper - Copper is harmful to fish and invertebrates and can be current in tap water where it can enter the water you have older pipes. It is also make known in many fish medications.

Nitrates - Nitrates are only injurious to the fish at high levels and are produced by the nitrifying bacteria from nitrites which are harmful at much berth levels. The only way to darken the nitrate levels to below the acceptable 20ppm in your fish tank is to do regular partial water changes.

Nitrites - are poisonous and are produced by bacteria from the ammonia excreted by fish. They are then changed to the lesser hurtful nitrates. The nitrite levels in a well cycled fish tank should be zero.

pH - is a measure of the acidity of the water. A neutral solution will have a pH of 7, an acid solution lesser than 7, a basic solution more than 7. Although different fish prefer different pH levels most fish will be fine over a wide pH range. Some fish prefer a pH as high as 8.5, some as low as 5.5. Unless you have fish with these extreme requirements there is usually no need to adjust the pH of the water.

Phosphate - this chemical can be grant in fish food, tap water or from decaying factory material. It is a fertiliser for plants and can cause an algae bloom if the levels are too high. Regular water changes should keep the phosphate at an acceptable level.

Salinity - the concentration of sodium chloride in the water is important if you have a salt water tank and can be measured using a hydrometer.

Hardness - dissolved minerals in the water lead to the hardness. The main minerals present in tap water that cause hardness are magnesium and calcium and these will be now to a greater scope if you live in a strenuously water area. It is not really an issue for freshwater tanks unless you live in an area where the water is very soft. For saltwater tanks it is more important as some invertebrates and live corals indigence these minerals to grow.

Related :


From : articlesbase.com

Posted by CHALERMWAT WONGSUWAN